EMPOWERING AVIATION
Slider
Embraer ERJ -170/190 B 1.1 and B2 (-sub) categories Aircraft Type Theoretical Training

Duration: 28 days

Target Group

Embraer 170 and 190 maintenance training courses are intended for B1 and/or B2 line and base maintenance technicians. Trainees must also have the knowledge and experience levels required for the corresponding CARC/ EASA licenses, or equivalent qualifications.

Content

B1/B2 type training for the Embraer 170 and 190 Our B1/B2 type training consists of both theoretical and practical level 3 training in the areas of electrical systems, airframe systems, powerplants and avionics, and fully complies with all CARC/ EASA Part 147/Part 66 appendix III requirements.

Objective

After completing their B1/B2 maintenance type training, the trainee should be able to:

  1. Recall the safety precautions
  2. Provide detailed descriptions of systems
  3. Structures and powerplants and their interrelationships
  4. Use, interpret and apply appropriate documentation including the SRM and TSM
  5. Identify special tooling and test equipment
  6. Identify the locations of principal components
  7. Correlate information from various sources for troubleshooting to maintenance manual level
  8. Describe/perform the procedures for servicing
  9. Describe/perform typical functional checks as per the AMM
  10. Describe/perform removal/installation procedures unique to the aircraft type

The above also requires a knowledge of the relevant manuals (such as the maintenance manual, the systems schematics manual, the wiring manual and the illustrated parts catalogue).

Examination

Closed book examinations will be conducted throughout the course. The minimum passing mark for the exam paper is 75 %. Participants will receive a selected type training Part-147 certificate upon successful completion of the course.

Embraer ERJ -170/190 B 1.1 and B2 (-sub) categories Aircraft Type Practical Training

Duration: 10 days

Aircraft Engine

GE CF34

Prerequisites:

CARC/EASA Part-66 Aircraft Maintenance License category B1/B2 and successfully completed the appropriate theoretical course on relevant aircraft type and previous practical experience of aircraft/engine of comparable construction and system.

Target Group

CARC/EASA Part-66 category B1 and B2 or other maintenance staff

Content

This course corresponds to the theoretical course and enables participants to gain competence in practical Line and Base Maintenance, using a structured learning process. The training will be conducted on the aircraft, in maintenance facilities and in the classroom.

Objectives

Upon completion of the course, the participant will be able to:

  • Apply the relevant safety precautions
  • Identify and apply aircraft technical documentation
  • Name, identify and locate aircraft system Components
  • Perform normal operation of aircraft systems
  • Perform the servicing and ground handling
  • Perform system operational tests and on-board maintenance system supported tests
  • Carry out routine thorough visual inspections
  • Describe component removal / installation procedures unique to the aircraft type
  • Determine aircraft airworthiness in accordance with MEL/CDL, and explain maintenance
  • Procedures according to the minimum equipment list (MEL)
  • Correlate information for the purpose of making decisions in respect to fault diagnosis and rectification

Assessment:

Practical training will be documented in the Practical T raining Form (PTF). Practical assessment will be conducted and assigned as “passed” or “not passed”.